In Stock Free Samples Acoustic Panel Wall Wood
In Stock Free Samples Acoustic Panel Wall Wood
The modern interior design tends to be simple and minimalist with large and clean surfaces, which is really nice, but it can be problematic when it comes to the acoustics. The result can be a home where there is a lot of noise and reverb. One can even do some things to avoid this - one can adjust with curtains, blankets, soft furnishings, pillows and the like, which can help to absorb the sound.
If you want to significantly improve your acoustics, these acoustic panel panels are a great bet! Could be in the living room, hallway, kitchen, children's room, bedroom or office.
They are also suitable for office communities, shops and restaurants - there is only your imagination that sets limits. The Kusrustic is designed to reduce the noise level and is an effective solution for sound absorption while bringing down the reverberation time for noise in the home.
If you want to achieve an even better absorbency, it is recommended to lay a 3mm MLV insulation behind the panel as an extended acoustic solution. The acupuncture is made up of black/Red/white MDF slats with wood veneer mounted on a black kuspanel made from recycled plastic bottles.The acoustic panels are designed by Kingkus and they are produced in China.
Kusrustic Panels can be mounted with very few tools - the panel is mounted on 5 horizontal bars with black screws. You will find E0 hot glue,spray glue or gun nail to install on the wall
Sound absorption performance of different materials
Soud absorbing PET board (polyester fiber sound absorbing board) has a good performance in medium and high frequency sound. Sound diffusion MDF slats diffuse part of the sound. Thus, the combination of them can ensure the adequate sound energy, high performance of medium and high frequency sound and provide a quiet environment.
It provides the best solution for effective sound absorption, while reducing the reverberation time of room noise. The panel achieves an absorption coefficient of 0.97 at a frequency of 1,000 Hz, and loud sounds as well as "normal" noise in a room range in frequency from 500 to 2, 000 Hertz. If you want a better absorption, it is recommended to place a 45mm insulation layer behind the panel. The solution will improve the acoustic quality of the panels.
The base of the product is made from a 9mm thick polyester material obtained from the fabric recycling process. The material meets the requirements of global recycling standards,does not contain any harmful substances to health, and complies with EN13501 fire grade B-S1, DO.
