Finest Price Factory Directly Supply Wooden Slats Timber Acoustic Panel

How to install acoustic slat wall?

Acoustic slat wall panel Installation Preparation - Before you start installing the slatted wall, you need to calculate the number of panels you will need. The wall on which you plan to install the slats should be a flat, smooth, dry, and dust-free surface. PLEASE NOTE - Clean the wall and check its level before installation. The housings of the sockets and contacts should be removed and the lighting holes drilled.

1. Stick directly to the wall
For this, construction glue or scratch glue is recommended.

2. Screw directly into the wall
By using black screws for the black backing option or silver or grey screws for the grey backing option, the panels can be screwed directly into the wall through the sound absorbing felt. We recommend using at least 9 screws per panel, spaced 200mm apart in width and 800mm down the length of the panel. If installing on a ceiling, make sure to screw them into the ceiling joists. For example, if entering drywall, make sure you use the correct fixtures.

3. Screw the panel into the 45mm stick
We recommend screwing 45mm wooden rods to the wall and screwing the panels directly into the rods through sound absorbing felt for best sound absorption. Combined with rock wool sound insulation behind the panels between the batons, this will achieve a class A sound absorption.